www.hameco.eu
hameco
5
Installation and Connection of Equipment
1. As shown in the diagram of loudspeaker master, first install the external antenna,
connect the computer equipment with USB cables, then connect the power input port of
the loudspeaker master to the AC power socket with the master power adapter, turn on
the power switch of the master; then the master indicator will be on in green.
2. Before use, the wireless microphone slave should be connected with the USB power
adapter to fully charge the built-in battery. The slave charging indicator will be on in
orange when charging and will be off when the battery is fully charged. When the master
is connected wirelessly, the slave ring light flashes in red, indicating low battery and that
the battery needs to be charged in time.
3. Wireless microphone slave, Press and hold the button for a moment until the ring
green light is always on, indicating successful wireless connection with the master. If the
green light flashes, indicating no wireless connection with the master.
4. The installation distance between the loudspeaker master and all wireless micro-
phone slaves shall be more than 2m, and the recommended installation distance be-
tween wireless microphone slaves shall be 1.5m.
HA-80-PRO user manual