5
4
Non-interlocked housing label – notifies of a potential hazard when covers
are removed
UV Hazard warning label – indicates hazardous levels of UV light are
present.
Table 2:
Safety Label Meanings
2.5. Safety Interlocks
The TLS-EQ-9 is equipped with interlocks to prevent operation of the device when any of the following
conditions are present:
•
An external interlock is open
2.6. External Interlocks
External interlock pins are provided for the customer’s use. Any suitable normally-open contact or solid-
state switch can operate the interlock circuit.
The interlock circuit must be connected to enable the operation of the unit. Should the interlock connection
open during operation or standby, the source is immediately disabled, and all light output from the aperture
ceases.
2.7. Correct disposal of the unit
When the TLS-EQ-9 has finally been removed from service, observe all local environmental regulations for
proper disposal.
3. Preparation of System
3.1. Unpacking guide
Start by inspecting all parts of the system for completeness and any damage incurred in shipping. Remove
the straps and corner protectors. Carefully cut the taped seams using a sharp utility knife – cut the two end
seams first. Lift the top panel slightly and cut the center seam. Open the box and remove all padding
materials from the top to expose the equipment
