Hamamatsu ENERGETIQ LDTLS TLS-EQ-77H, Operation Manual

Page: 11 / 45

6
3.2. System Description
The TLS-EQ-77H system consists of a Power Supply Controller unit, Lamp House, Remote Control unit,
Monochromator Power Supply (not shown), and interconnecting cables (not shown). The system
incorporates the Energetiq EQ-77 Laser Driven Light Source®, a monochromator, and custom optics.
The following sections provide descriptions of the system components and controls, and give an overview
of their functions. Refer to the “Installation” section of this manual (Section 4) for more detailed
information.
3.2.1 Power Supply Controller
The Power Supply Controller contains:

Laser power supply

Thermo-electric cooler control system for laser

Control electronics

Status indicator LEDs
Figure 2: EQ-77 Controller
EQ-77 Controller
# Component Description
1 Power input connector This is an IEC 320 inlet connector for AC power input. See Section 4 for detailed
information
2 Status indicator See Table 2 for a list of descriptions
3 I/O Interface connector Provides access to control and status signals
4 Lamp control connector
(21-pin mixed D-sub)
Provides various power and control signals to/from the Lamp House module. No other
connector or cable may be used with the EQ-77 other than the one supplied
.
5 RS-485 Connector (9-pin
D-sub
Connector for optional RS-485 interface. See Section 10.4 for electrical details and
commands.