ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
48
12. MAINTENANCE
12-1 CARE
(1) Camera body
Perform cleaning of this equipment with the dry soft cloth.
•
Do not wipe with a damp cloth or unclean cloth.
(2) Glass window on the image sensor
1. Blow the dust from the glass window with an air duster.
2. Moisten a lens cleaning paper with a little ethanol, and wipe over center area of the window,
gently.
3. Confirm whether dust is not left.
Attach the camera to an optics, and check if there is dust or not under the uniform light
condition. If there is dust on the image, please clean the glass window again.
•
Do not use anything other than a lens cleaning paper for cleaning of glass window in front of
the image sensor.
•
Do not touch the surrounding parts of image area when wiping the glass window.
•
Use a plastic tweezers and take extra care not to scratch the glass window with the tweezers.
Even with plastic tweezers, there is possibility to make scratch on the glass window in case
tweezers touch it.
Summary of Contents for ORCA-Lighting C14120-20P
Page 2: ...Blank page...
