ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
45
11-5 SWITCHING THE COOLING METHOD OF “DCAM
CONFIGURATOR”
(1) Notices
- When the camera is shipped, the cooling method for the camera is set for “Air-cooling”.
(It is unnecessary to exchange it when the camera is just used at “Air-cooling”.)
- The setting is not changed even if the power supply of the camera is turned off. Because it is
unnecessary to set the “DCAM Configurator” whenever the camera is started.
- When the setting is changed, restart the camera. By restarting, the setting is reflected on the
camera. After cooling method was switched, the camera memorizes the last setting as the
default setting for cooling.
(2) Starting “DCAM Configurator”, Setting to “Water-cooling”
1. Start the “Setup.exe” in the DCAM-API software holder in the computer.
If the software is not installed to the computer, set the CD/DVD of the DCAM-API into the
CD/DVD driver in the computer.
2. “DCAM-API Setup” window is displayed on the screen. Click the “Tools”.
Summary of Contents for ORCA-Lighting C14120-20P
Page 2: ...Blank page...
