C9100-02 Ver.1.7
7. CONNECTING
CABLES
Refer to the figure below when connecting the various cables.
AC adaptor
③
Power supply cord
A3472-07 (Option)
Camera
①
Camera cable
(Option)
PC
②
CameraLink interface cable
(Option)
CameraLink interface board
Fig.7-1
•
When cables are connected, confirming the power switch is in the OFF position.
①
Camera cable (Option: A9189-05)
Camera used for connecting the camera to the AC adaptor.
②
CameraLink interface cable (Option: A9262-05)
Cable used for connecting the CameraLink interface connector to the CameraLink
interface board mounted on the host computer.
③
Power supply cord (Option: The accessories of A3472-07)
Note
•
Hamamatsu recommends optional interface for C9100.
- AC adaptor
A3472-07
- Camera cable A9189-05
- CameraLink interface cable A9262-05
Depending on type of interface cables, the C9100 may not keep CE marking
compliance in terms of EMC directive.
10
