29
15.9 Backlight
The backlight can be confi gured for each operating
mode (Operation Mode, Standby Mode, Slumber Mode)
separately.
Proceed as follows:
[ ]
System settings
Backlight
•
For the operation modes
Operation Mode
and
Slumber mode
, select between various brightness
levels.
•
For
Standby Mode
, you may also choose a brightness
level for the backlight when the radio is in standby
(
Standby Level
). Alternatively, you can set the backlight
to turn off completely in standby (
Standby Level
Off
).
•
Choose a time interval for Timeout. When the radio is
in standby, press [
ENTER/NAVIGATE
] to illuminate the
display at the brightness level set for that operating
mode for the selected interval of time.
•
Alternatively, you can disable this feature (
Timeout
Off
).
Alternatively, press [ ] on the remote control to directly
adjust the backlight setting for the current operating mode.
16. UNDOK – everything in the palm of your hand
The UNDOK app, developed by Frontier Silicon, gives you
full control of radios and speakers from your smartphone.
Whether you are setting up the device for the first time,
specifying settings for the equaliser and multi-room, or
managing your favourite stations – the UNDOK app lets
you access all the features from your smartphone or tablet,
thereby offering you greater convenience.
16.1 First-time setup of the device with UNDOK
Note
A detailed description of the UNDOK app and
the full scope of functions can be found in our
UNDOK guide at:
www.hama.com->00054850 ->Downloads
The first time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate Wi-Fi network
that you can connect to with your tablet or smartphone.
