20
12.2 Automatic Bluetooth
®
connection (after
successful pairing)
•
Terminal devices already paired with the radio are
automatically saved on the radio.
Note – Connection impaired
After the radio and terminal device have been paired,
a connection is established automatically. If the
Bluetooth
®
connection is not established automatically,
check the following:
•
Check the Bluetooth
®
settings of your terminal device
to see whether
IR150MBT
is connected. If not, repeat
the steps listed under Bluetooth
®
pairing.
•
Check whether your terminal device and the radio are
less than 10 metres apart. If not, move them closer
togehter.
•
Check whether obstacles are impairing the range. If
so, move the devices closer together.
12.3 Terminate Bluetooth
®
connection
[ ]
Main menu
Terminate connection
•
Then select the
YES
button by turning [
ENTER/
NAVIGATE
], and confirm termination of the Bluetooth
connection by pressing [
ENTER/NAVIGATE
].
13. Sleep
The radio has a sleep function, after a defined time the
radio switches to standby mode.
•
Repeatedly press [
SLEEP
] on the remote control to set
the desired time interval (Sleep OFF/15/30/45/60/90/120
minutes).
•
Alternatively, set the time interval from the main menu
using [
ENTER/NAVIGATE
]:
[ ]
Main menu
Sleep
•
After the defined time the radio switches to standby
mode.
•
Press [
VOLUME/POWER
], to turn the radio back on.
•
If a time interval is already activated, you can change or
disable it at any time by again pressing [
SLEEP
] on the
remote control.
Note
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in normal operation
15.9. Backlight
.
