24
HAMA_DP2_UM-20151116-EN
EN
6 MAINTENANCE
6 MAINTENANCE
Introduction
The chapter provides information about maintaining the machine.
6.1 Daily maintenance
• Check the cables and hoses for damage.
• Check the safety markings and hazard designations.
• Check whether all safety devices are still intact and present as they were during
commissioning.
Safe maintenance
• When performing maintenance and repairs to the HAMA Duo-Power
2.0, the machine must be depressurised.
• When performing maintenance and repairs, always remove the
connecting cable to avoid accidental switching on!
• Do not use the HAMA Duo-Power 2.0 if any part is worn or damaged.
Only replace parts with genuine HAMA parts.
• Wear close-fitting overalls, safety goggles and safety shoes.
• Use appropriate tools of the correct size.
• Tighten bolts and nuts with the correct torque (see the “Tightening
torques” chapter).
• Always have electric faults and failures resolved by a certified
electrician. Failure to do so may lead to highly dangerous situations.
• Disconnect the connecting cable from the wall socket immediately
when a fault or failure occurs or when electrical parts are damaged.
NEVER use your fingers to try to locate a leak. Use a piece of
cardboard.
