25
17.10 Auto standby
Note
•
For reasons of environmental protection and to save
valuable raw materials, the radio automatically switches
to standby mode after 15 minutes as soon as the playback
has been switched to a very low volume or if the radio
has been muted.
To enable or disable this function, proceed as follows:
[ ]
System settings
Auto standby
18. UNDOK – Everything in the palm of your hand
The UNDOK app, developed by Frontier Silicon, gives you
full control of radios and speakers from your smartphone.
Whether you are setting up the device for the first time,
specifying settings for the equaliser, or managing your
favourite stations – the UNDOK app lets you access all the
features from your smartphone or tablet, thereby offering
you greater convenience.
18.1 First-time setup of the device with UNDOK
The first time you switch on an UNDOK-enabled product
from Hama, or when you have set it to the factory settings,
it creates a micro access point – a separate Wi-Fi network
that you can connect to with your tablet or smartphone.
18.1.1 Procedure for iOS users
•
Open the UNDOK app on your iPhone or iPad
•
Tap the
Set up audio system
menu item
•
Make sure that the radio or speaker is in SETUP mode.
Set the product to the factory settings, if necessary.
Confirm the query with
Next
•
The UNDOK app now prompts you to connect to the
product's Wi-Fi network using the iPhone/iPad settings –
to do so, switch to the system settings on your iPhone
and select the Wi-Fi network (for example, Setup Hama
DIR3120LED). Then return to UNDOK and tap
Next
•
Now choose a name for the radio (for example, Office
DIR3120) and confirm your entry with
Next
•
This takes you to the date and time settings – here you
set the time format, time source and time zone.
•
The various network configuration options are then
offered to you (where applicable, Wi-Fi, WPS and
Ethernet). Tap the desired method; UNDOK switches
to the next window
•
Depending on the selected method, you can now select
and configure the desired Wi-Fi network, set up a WPS
connection.
•
Finally, the radio connects to the network; by tapping
Start using my audio system
, you will be able to use
the device in UNDOK
