Hama Cube Series, Operating Instructions Manual

Page: 6 / 122

4
Display Searching for the DCF signal
Display flashing
Active
Display steady
Successful - signal reception
Not displayed Inactive – no signal reception
Note – Cancellation of search process
• The search for the DCF signal can be cancelled by pressing the +/RCC button (10).
• Then set the time and date as described in 5.2 Manually setting the date/
time .
• A search for a DCF signal is nonetheless carried out daily (between 1 am and 5
am) in order to update the time and date. If the signal is received successfully, the
time and date are automatically overwritten.
Note – Time settings
• If, during initial setup of the device, no DCF radio signal is received within the first
few minutes, the search is aborted. The radio icon (6) will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight,
since interference is generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at
another location or you can manually set the time and date.
• The clock automatically continues to search for the DCF signal on a daily
basis (at 1 am and 5 am). If the signal is received successfully, the manually
set time and date are overwritten.