Hama Classic, Operating Instructions Manual, Page: 4 / 37

3
4. Getting started and operation
4.1 Starting up the clock
Open the battery compartment cover
(1), insert one AA battery, ensuring that
the battery is inserted correctly in terms
of polarity, and then close the battery
compartment cover (1). The clock is ready
for operation.
5. Operation
5.1 Setting the time
• Turn the setting wheel (2) on the back
in the direction indicated by the arrow to
set the current time (hours/minutes).
• To set the seconds, remove the battery
to stop the seconds. Put the battery back
in to start the seconds hand again at the
right second.
5.2 Alarm clock
• Move the setting wheel (3) on the
back of the alarm clock in the direction
of the arrow to set the appropriate alarm
time. The hand for the alarm time moves in
an anticlockwise direction.
• Pull the sliding switch (4) on the back
outward or up to enable the alarm. An
alarm will sound at the set alarm time.
• Press the sliding switch (4) down to shut
off and disable the alarm.
5.3 LED lighting
Press the Light button (5) to activate the
LED lighting.
6. Care and Maintenance
Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does
not get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting
from improper installation/mounting, improper
use of the product or from failure to observe
the operating instructions and/or safety notes.
8. Technical Data
“Classic” alarm clock
Power supply
1.5 V
1 x AA battery