12
Universal LCD Remote Control
Function buttons
1. LCD: Displays the selected mode and time.
2. Mute
3. Switches the device on or off.
4. MENU: Corresponds to the menu (for
configuring certain device functions) or
the OSD (on-screen display), or the SAVE
button on your original remote control.
5. TV/Video
6. Hold page
7. Teletext mode
8. TV/Text
9. Corresponds to the UP, DOWN, LEFT,
RIGHT, OK, and EXIT buttons for menu
functions on your original remote control.
When in setup mode, the arrow buttons
are used as a cursor and to confirm and
exit the programming of your remote
control.
10. VOL±: Corresponds to the VOLUME UP/
VOLUME DOWN buttons on your original
remote control.
11. CH±: Corresponds to the PROGRAMME
SELECTION button on your original remote
control.
12. TV, CBL/SAT, VCR, DVD, CD, TAPE, TUNER,
AUX: Used for choosing the device you
wish to operate.
13. REW/PLAY/FWD/PAUSE/REC/STOP: Func-
tions for CD, DVD, VCR and TAPE.
14. 0-9: The number buttons have the same
function as the number buttons on your
original remote control.
15. A-B: Switches between two scenes of a
film or DVD.
16.
(ENTER): For instantly switching the
selected channels (less than three digits).
17. MACRO: Enables you to carry out several
processes in succession.
18. SET: Used for setting up and configuring
the remote control or displaying the status
on the LCD.
19. LEARN: Used for learning the functions.
20. SCAN: Enables a fast overview of all
devices.
21. Colour buttons: FASTEXT
General description:
Thank you for purchasing the Hama 8in1
Universal LCD Remote Control. The remote
control, with which you can operate up
to eight devices, is equipped with a very
comprehensive code library. It is suitable for
a variety of TV sets, video cassette recorders
(VCR), DVD players, CD players, satellite
receivers (CBL/SAT), cassette recorders
(TAPE), tuners (TUNER) and other audio
devices (AUX) found on today’s market. An
indicator LED makes it easier to program the
remote control. The Hama 8in1 Universal
LCD Remote Control controls all the essential
basic functions of your devices. Please read
the entire operating manual carefully before
using the remote control for the first time. In
addition, this remote control has the ability
to “learn” new codes from other remote
controls as necessary in order to supplement
the preset codes. The “MACRO” function
allows you to carry out several processes in
succession with just one button.
The “Device lock” function protects your
device from changes caused by a new con-
figuration until the device is unlocked.
The Hama 8in1 Universal LCD Remote Control
is also equipped with a backlight for the LCD
and a separate illuminated display for the
device currently in use.
The battery status display informs the user in
good time about battery replacement.
All configuration data is saved permanently
in the backup storage, meaning you do not
have to worry about data loss when replac-
ing the battery.
The Hama 8in1 Universal LCD Remote Control
is also equipped with a clock for displaying
the current time in AM and PM.
As the functions detailed above show, the
Hama 8in1 Universal LCD Remote Control is a
modern, high-performance device.
With the “Volume lock” function, you can
lock the VOL+/VOL- button so that it solely
controls the amplifier of your home theatre
system.
(To set up this function, see the Part A of the
“Additional Functions” section.)
Inserting the batteries:
The remote control is powered by 2 AAA
batteries (not included).
1. Turn the remote control over and open the
back cover.
2. Insert the batteries. Pay attention to the
polarity (note the (+) and (-) markings in
the battery compartment).
3. Close the cover.
Note:
When the batteries need to be re-
placed, the following symbol is shown in the
display: “ ”.
All data as entered above is stored during
battery replacement. Only the clock needs to
be set again.
The Hama 8in1 Universal LCD Remote Control
is a new pre-programmed remote control
developed for the European market that is
solidly built and equipped with an extensive
code library and powerful functions. It offers
the following functions:
A. A total of 8 device buttons: TV, VCR, AUX
[for tuners and tape players], DVD, CBL/
SAT [analogue and digital satellite receiv-
ers, cable], CD, TAPE, TUNER [LD, audio
amplifier, digital audio tape player for AUX]
B. Three operating modes: Setup mode,
automatic search and learn mode
C. LED and LCD for indicating signal transmis-
sion
D. LCD for displaying the selected mode, date
and time
E. LED and LCD for displaying the program-
ming
F. Teletext/FASTEXT function
G. Menu function
H. Locking function for volume and mute
I. Device lock
J. Changing device assignment
K. Setting up the LCD clock
L. MACRO function
M. SCAN function
N. Background settings
O. Contrast settings
Setting up codes
A. Setting up using brand name and code:
1. Switch on the desired source device (e.g.
TV). Insert a cassette if you wish to oper-
ate a VCR.
2. Press and hold the SET button on the
remote control. At the same time, press a
device button (e.g. TV).
3. Now release both buttons. The brand name
appears in the display.
4. You can then select the brand name of your
device using the
C
and
D
buttons (e.g. TV
brand Philips).
5. Check the functionality of the remote con-
trol by pressing the standby button for one
second (red button). If the device remains
switched on, then the selected code has
no function.
Try again with the next available code
(using the
A
and
B
buttons).
Remember to check each individual code
with the red standby button (see steps 1 to
5). If the device switches to standby mode,
then the code is most likely suitable for
use. After switching on the device again,
check whether the other functions (e.g.
volume or switching stations)
also work when using the same code.
If this is the case, you can use the code
(see step 6). If functionality is limited (e.g.
standby only), then try again with a differ-
ent code (steps 1 to 5).
6. When you have found a suitable code,
press the OK button to store it. “SUCCESS”
appears in the display and the setup mode
is exited.
13
g
Operating Instructions
