Hama 00123139 RC 610, Operating Instructions Manual

Page: 8 / 70

6
5.2. Manually setting the date/time
Time
•
Move the slide switch (5) to the TIME SET position to manually set the time (1).
• Press the ▲ button (6) or the  button (7) to set the hours and minutes of the time.
• Move the slide switch (5) to the position to save your settings and return to normal mode.
Weekday
•
To change the language in which the weekday is displayed, press the  button (7) for 3 seconds.
The current language will be displayed.
• Hold down the  button (7) to change to the other languages.
note – Day of the week
You can choose German ( GE ), English ( En ), Swedish ( SW ), Dutch ( DU ), Italian ( IT ), Spanish ( SP )
or French ( FR ) for the weekday display.
Date
•
Move the slide switch (5) to the DaTE SET position to manually set the date (3).
• Press the ▲ button (6) or the  button (7) to set the date (day, month, year).
• Move the slide switch (5) to the position to save your settings and return to normal mode.
Setting the time zone
note – Time zone
• The DCF signal can be received over long distances, but always transmits the current Central
European Time in Germany. Make sure you account for the time difference in countries with
another time zone.
• If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set
+3 for the time zone. The clock then automatically sets the time to 3 hours after the DCF signal
received or relative to the manually set time.
• Press and hold the ▲ button (6) for approx. 3 seconds until the time zone symbol
F
is displayed.
• Move the slide switch (5) to the TIME SET position to manually set the time zone.
• Press the ▲ button (6) or the  button (7) to set the hour offset of the time zone.
• Move the slide switch (5) to the position to save your settings and return to normal mode.