11
Mode:
Choose when the alarm is to activate:
Daily – Once – Weekdays – Weekends
Confirm the selection by pressing [
+/OK/-
] (10).
Date:
If you selected
Once
, enter the date for the one-off alarm.
Confirm the selection by pressing [
+/OK/-
] (10).
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Confirm the selection by pressing [
+/OK/-
] (10).
Note
It is recommended to allow the radio to update the
time automatically. This ensures that the time is always
correct even if there is a separation of power supply –
for example a power cut.
Following successful activation, the alarm symbol (alarm 1
or alarm 2) appears at the right-hand edge of the screen.
12.2 Activating / deactivating the alarm
To activate / deactivate the alarm, proceed as follows:
•
Select alarm 1 or 2 - by repeatedly pressing [ ] (8).
•
Confirm the selection by pressing [
+/OK/-
] (10).
•
Select
ON
to activate the alarm and make the alarm
settings. Confirm the selection by pressing [
+/OK/-
] (10).
•
Select
OFF
to deactivate the alarm. Confirm the selection
by pressing [
+/OK/-
] (10).
12.3 Stopping the alarm / Snooze function
•
When the alarm activates, press [ ] (8) to stop it.
•
Press [ ] (5) to activate snooze.
•
Select the required snooze duration (5/10/15/20/25/30
minutes) by repeatedly pressing [
] (5).
13. Sleep
The radio has a timer function, which switches the radio
to standby mode after a pre-defined length of time.
•
Make sure the radio is switched on.
•
Press [
] (5) to set the required time interval
(5/10/15/30/45/60 minutes) using [
+/OK/-
] (10).
•
Confirm the input with [
+/OK/-
] (10).
•
During playback, the sleep symbol appears at the
left-hand edge of the screen.
14. More settings
14.1 Time / date settings
•
Press [ ] (6) and navigate to the "Settings" menu item.
•
Select "Time" and confirm by pressing [
+/OK/-
] (10).
•
Choose between "Set time/date" and "Auto update time"
and confirm by pressing [
+/OK/-
] (10).
Set Time/ Date
Set the time (
hh:mm
) and date (
DD-MM-YYYY/
MM-DD-YYYY
) manually using [
+/OK/-
] (10).
Autoupdate
• Update from FM / Update from DAB
If automatic time and date adjustment is activated,
the device receives time and date information from the
station over the FM/DAB/DAB+ radio network. This is
the best way to ensure that the clock will run accurately
and the alarm will trigger at the correct time, even after
power outages.
• Update from Any
It is recommended to use this setting (Update from
FM and DAB) for the automatic update.
• No update
The time and date (
DD-MM-YYYY/MM-DD-YYYY
) must
be set manually; no automatic calibration takes place.
