Ham radio ZUMspot RPi Nextion 2.4, Quick Start Manual

Page: 1 / 9

Nextion Kit Quick Start Guide
The Nextion Kit has all of the capabilities of the ZUMspot all packaged up in a nice clear case with a
Nextion display on top.
Specifications:

High performance 32-bit ARM processor

ZUMspot Board Fully Assembled And Tested

Supports DMR, P-25, D-Star, System Fusion, NXDN and POCSAG

Onboard LEDs to show status (Tx, Rx, PTT, Mode)

Up to 10mW RF power

SMA antenna connector, UHF antenna included

Mounted on Raspberry Pi 3B

The firmware is pre-loaded and is easily upgraded via software.

Built-in 2.4" Nextion display

2.4A power supply

1 Year Warranty

Open source firmware (MMDVM) and board design

Open source 3D printable case available
The ZUMspot RPi Nextion 2.4 Kit Package Includes:

ZUMspot Pi UHF Board

Raspberry Pi 3B

C4 Lab case

2.4A power supply

2.4" Nextion Enhanced display

UHF Antenna

Pre-Imaged 16 GB MicroSD Card with Pi-Star Software