LEAK USER INSTRUCTIONS
1.
INTENDED USE OF LEAK
LEAK is a sensor device to detect water leakage.
The device reports the resistance
value between the detecting pins and sends this information to a Wirepas protocol
mesh network. The device has also sensors for temperature, ambient light,
magnetism and acceleration and it includes an LED for indication purposes. It has
also sensors for humidity and air pressure but this data is not useful because of the
closed structure of the device. Typically LEAK is used together with MTXH Thingsee
Gateway in use cases where the measurements are performed in several locations
and this data is wirelessly collected and sent via 2G cellular connection to a data
server / cloud.
2.
GENERAL
The device covers are ultra sonic welded together to get a robust structure against
moisture and dust. Batteries cannot be changed.
When delivered, the device is in a very low current consumption mode. When taken
into use, it needs to be switched on with a magnet switch tool:
