Haltech Engine Management Systems
(A division of Lockin P/L, A.B.N. 68 061 744 303)
HEAD OFFICE: 3 Centre Place, Wetherill Park NSW 2164 Australia
t. +61 2 9729 0999 f. +61 2 9729 0900
Haltech IQ3 Quick Start
This guide is designed as a quick start guide to connecting and programming your Haltech IQ3 Dash. Only basic functions
are covered in this guide therefore we recommend you read and familiarize yourself with the RacePak IQ3 Manual as
found on the installation disk included with your Dash.
For Platinum ECUs:
Ensure your ECU is running firmware version 1.12 or later and CAN Mode is set to ‘Haltech CAN
(Version 2)’. See the final page of this document for more information.
For Elite ECUs:
Ensure your ECU has the ‘Haltech CAN Supported Dash’ function enabled. See the final page of this
document for more information.
Your Haltech IQ3 Dash is pre-programmed with a ‘plug and play’ configuration. You can simply connect the Dash to your
ECU and you’re done.
