Solar Area Floodlight Instruction www.cooperlighting.com
IL51831123
2
ENGLISH
REVIEW THIS INFORMATION TO ENSURE A REVIEW CONTENTS
Before installing the light fixture, take the contents out of the packaging and ensure that all parts are present. Compare parts with the hardware
included and package contents sections. Do not attempt to assemble, install, or operate this light fixture if any part is missing or damaged.
ESTIMATED INSTALLATION TIME: 30 MINUTES
CHECK THE INITIAL BATTERY CHARGE
1. Prior to use, make sure batteries have been charged for 2 full days of sunlight. (The battery will require 8 hours of direct sunlight to completely
charge). Ensure the fixture is OFF by selecting that button on the included remote. If possible, aim the solar panel located on the back of the
fixture toward South for optimal charging.
2. Check the battery indicator light located on the fixture housing before installation (see Table 1).
3. Actual operating time will vary depending upon how frequently the light is turned ON.
4. Solar lighting is not designed to equal standard 120V lighting. The amount of light output is reduced to allow the sun time to fully recharge the
battery between lighting cycles.
MOTION SENSOR
1. When deciding where to mount this fixture please keep in mind that the motion sensor that activates the light has a “field of vision” of 20 FT in
front of the fixture and about 120-degree detection angle at ambient temperature of 77F.
2. When testing the motion sensor performance during the daytime the solar panel need to be covered to override the Dusk to Dawn functionality
of the light fixture. Cover the solar panel fully using a piece of cardboard and tape for first time testing.
PREPARING FOR INSTALLATION
SPECIFICATIONS
MOTION
SENSOR RANGE
SENSING
ANGLE
LUMENS
POWER SPECIFICATIONS
OPERATING MODE
MOTION SENSOR
TIME OUT SETTING
20FT
120°
1000lm
OR 1500lm
OR 3000lm
OR 4500lm
Solar Panel and
Rechargeable Nickel
Manganese Cobalt Batteries
(non-replaceable)
Battery Lifespan: 300 Cycle
Motion, Dusk to
Dawn, Dusk
to Dawn, Manual On,
Manual Off
30 seconds,
60 seconds,
90 seconds
LED
BATTERY
INDICATOR
LIGHT
MOTION
SENSOR
ON/OFF
SWITCH
ITEMS REQUIRED
(Purchase separately)
1. Philips Screwdriver
2. Safety Goggles
3. Adjustable Wrench
4. Work Gloves
5. Ladder
6. Power Drill
1
3
4
5
6
2
LED BATTERY INDICATOR GUIDE (TABLE 1)
FIXTURE STATUS
RED LED
GREEN LED
FIXTURE LED
Charging in progress
(Battery from 10% to 90%)
OFF
Blinking
OFF
Battery > 90%
OFF
ON
Remains in the same
state
Discharging (Battery from
90% to 10%)
OFF
OFF
Remains in the same
state
Battery low (<10%)
ON
OFF
Remains in the same
state
Motion mode selected
Remains in the
same state
Remains in the
same state
Blinks once when
mode selected
Dusk to Dawn (DTD)
mode selected
Remains in the
same state
Remains in the
same state
Blinks 2 times when
mode selected
DTD Mode
selected
Remains in the
same state
Remains in the
same state
Blinks 3 times when
mode is selected
WARNING-
Please ensure there are no bright
lights above the solar panel, otherwise there will
be false triggering.
