SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, fire which may result in serious
injuries, death or property damage.
• Read all instructions before using the product.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, fire or explosion,
causing personal injury or damage to other devices.
• Do not get your HALO Powerstation 1100 wet or store in extreme
temperature conditions.
• Do not disassemble or attempt to repair your HALO Powerstation
1100 yourself.
• Use a cloth to clean the exterior of your HALO Powerstation 1100. Do
not use liquid detergent or chemicals of any kind.
• Misusing or incorrectly connecting your HALO Powerstation 1100 may
cause electric shock to users and damage equipment.
• Keep your HALO Powerstation 1100 dry and away from moisture and
corrosive materials. The HALO Powerstation 1100 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO Powerstation 1100 to moisture, water, rain,
or snow.
• Keep your HALO Powerstation 1100 away from heat sources, including
open flames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging device may
present a risk of fire or chemical burn if mistreated. Do not expose to
fire or excessive temperature. Do not expose to heat above 212°F
(100°C) or incinerate.
• Your HALO Powerstation 1100 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO Powerstation 1100 during operation.
• In the unlikely event of leakage or explosion use sand or a chemical
fire extinguisher.
• Do not disassemble your HALO Powerstation 1100. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or fire hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
Powerstation 1100 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO Powerstation 1100 by the specified method
with the specified charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO
Powerstation 1100. Doing so may cause electric shock to users and
damage equipment.
• The HALO Powerstation 1100, along with its accessories, are not toys
and should be kept away from children.
• Do not insert any foreign object into the ports or openings of your
HALO Powerstation 1100.
• Do not modify or attempt to repair the HALO Powerstation 1100
except as indicated in the instructions for use and care.
• Make sure the HALO Powerstation 1100’s charging ports do not
become contaminated with lint or other debris.
• Batteries should be recycled or disposed of as per state and
local guidelines.
• The device shall be stored indoors and protected from the elements;
• When in use, steps should be taken to prevent the exposure to rain,
sleet, snow, and the like.
• For appliance and battery storage, do not exceed 104°F (40°C)
• Do not operate in explosive atmospheres such as in the presence of
flammable liquids, gases or dust.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specifications
Warranty and Contact Information
INCLUDED ITEMS
- HALO Powerstation 1100
- 90W Wall Charging AC Adapter
LOCATION OF CONTROLS
1. Digital Display Screen ON/OFF Button
2. Digital Display Screen
3. DC Input Indicator
4. 12-24VDC Input
5. USB Output ON/OFF Button
6. USB-C PD Input/Output Port
7. USB-A Output Ports
8. 110VAC Output Ports
9. DC Output ON/OFF Button
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO Powerstation 1100 before
first use.
CHARGING THE HALO POWERSTATION 1100
The HALO Powerstation 1100 can be recharged using several methods
and the recharge time will vary based on the method used. The HALO
Powerstation 1100 can be recharged via the DC input port using an AC
wall charging adapter, a car charging adapter or solar panels. The total
input power using the DC input port is 200W. The USB-C port can also
be used to recharge the unit. The total input power using the USB-C
input port is 100W. The HALO Powerstation 1100 can be charged with
the DC input and USB-C input simultaneously. Using the DC and
USB-Type C inputs simultaneously will provide faster recharge times.
The HALO Powerstation 1100 supports up to 300W charging input
power.
Using the 90W Wall Charging AC Adapter:
Use the provided 90W Wall Charging AC Adapter, and plug the AC
adapter tip into the 12-24V DC charge input. Next, connect the AC Wall
Charging Adapter into a wall outlet. The HALO Powerstation 1100
will automatically begin charging. When the HALO Powerstation
1100 is fully charged, all four battery indicator lights will be solid green
and the Digital Display will indicate 100%. When fully charged,
disconnect the cable.
Using the 65W PD Charger:
The HALO Powerstation 1100 can be recharged via the bi-direction
USB-C port using a USB Type C charging adapter. The HALO
Powerstation 1100 supports up to 100W charging input power.
Using the Car Charging Adapter:
Use the provided Car Charging Adapter, and plug the 5525 DC adapter
tip into the 12-24V DC charge input. The car charging adapter can be
connected to a 12V or 24V battery systems and support up to 120W of
charging power. To avoid discharging your vehicle battery, be sure to
start your vehicle.
Using Solar Panels:
The HALO Powerstation 1100 can be recharged with the use of one or
more solar panels (sold separately). A single HALO Solar panel can be
connected to the DC input or multiple HALO Solar panels may be
connected in parallel with the parallel kit accessories (sold separately).
The HALO Powerstation 1100 supports a 12-24VDC input and up to
200W solar charging input power.
BUTTON OPERATIONS
Digital Display Button:
Check the battery level by pressing the Digital Display button. To turn
on/off the Digital Display, simply press the Digital Display button. The
Digital Display will automatically turn off after 15 seconds if nothing is
connected to the output ports.
USB Output ON/OFF Button:
To turn ON, press USB Output ON/OFF Button. The USB Ports Output
LED will light up and the Digital Display Screen will turn on. To turn OFF,
press the USB Output ON/OFF Button.
DC Output ON/OFF Button:
To turn ON, press DC ON/OFF Button. The DC Output Indicator will light
up and the Digital Display Screen will turn on. To turn OFF, press the DC
ON/OFF Button.
AC ON/OFF Button:
To turn ON, press the AC ON/OFF Button. The AC Output Indicator will
light up and the Digital Display Screen will turn on. To turn OFF, press
the AC ON/OFF Button.
NOTE:
• To preserve the battery, turn off the DC, USB and AC outputs when the
product is not in use.
CONNECTING YOUR ELECTRONIC DEVICES,
EQUIPMENT AND APPLIANCES
The HALO Powerstation 1100 is compatible with AC and DC electronic
devices, equipment and appliances where portable, stationary, or
emergency power is required.
Error Codes:
Input Overvoltage Protection: The symbol will flash for 5
seconds when an input over voltage condition is detected.
Output Overload Protection: The symbol will flash for 5
seconds when an AC output overload condition is detected.
Low Power Alarm: The symbol will flash when the
Powerstation batter capacity is less than 3%.
Low Temperature Alarm: This low temperature symbol will
be displayed if the Powerstation is attempted to be used
outside the allowable operating temperature.
High Temperature Alarm: This high temperature symbol will
be displayed if the Powerstation is attempted to be used
outside the allowable operating temperature.
SPECIFICATIONS
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
There are several ways to power and charge electronic devices with the
HALO Powerstation 1100. Both AC and DC Output Ports can be used
simultaneously.
Using the 110V AC Output Ports:
The HALO Powerstation 1100 can be used to power your 110V AC
electronic devices, equipment and appliances rated for 1100Watts or
less. To begin, connect the AC power plug from your
device/equipment/appliance into the AC Output Port of the HALO
Powerstation 1100. Then press the AC ON/OFF Button.
NOTE:
• Make sure the AC Power Plug is fully plugged into the AC Output Port.
• The HALO Powerstation 1100 will provide up to 2000Watts
surge power for a short duration.
Using the USB Ports:
The HALO Powerstation 1100 is compatible with any USB charging
cable. To begin, press the USB ON/OFF Button, then plug the standard
USB end of the cable into any of the 5V/2.4A USB Output Ports.
Connect the tip into the input of your electronic device to begin
charging. For PD (Power Delivery) Output, use a USB-C to USB-C cable
to charge your compatible electronic devices.
HALO USB Smart Charge Technology
Your HALO Powerstation 1100 contains the HALO USB SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging USB
electronic devices. The HALO USB SMART CHARGE TECHNOLOGY will
allow the HALO Powerstation 1100 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
Using the 12V DC Power Socket and 5525 Output Ports
The HALO Powerstation 1100 can be used to power your 12V DC
electronic devices, equipment and appliances. To begin, connect your
12V compatible device/equipment/appliance into the Power Socket or
5525 Output Port(s). Then press the DC ON/OFF Button.
USING YOUR HALO POWERSTATION 1100 FLOODLIGHT
Press the Floodlight ON/OFF Button once to turn ON.
Press the Floodlight ON/OFF Button twice to turn 50% brightness.
Press the Floodlight ON/OFF Button three times to turn
100% brightness.
Press the Floodlight ON/OFF Button four times to turn OFF.
Double Click the Floodlight ON/OFF button to turn on SOS mode light.
Press the button again to turn off SOS mode light.
TROUBLESHOOTING
If the HALO Powerstation 1100 cannot charge or power devices, please
check the following steps:
• Make sure the appropriate DC, USB or AC output is turned on and that
the LED buttons are green.
• Check the battery capacity. If it is lower than 3%, please recharge the
HALO Powerstation 1100.
• Make sure the power consumption does not exceed the rated power
of the port.
• If an error is observed, refer to the Chart on the next page.
• Do not operate the HALO Powerstation 1100 outside the allowable
operating temperature. (0-40°C / 32-104°F)
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certified peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certified peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
At HALO, we are dedicated to making the best quality products. To back
this up, this product is warranted. For full details regarding warranty
terms, exclusions and limitations, please visit: ZAGG.com/warranty. This
warranty does not affect any statutory rights that you may be entitled
to. Keep a copy of your purchase receipt as proof of purchase.
P O W E R S TAT I O N
1 1 0 0
