Halo Pocket Power 10000 Operating Instructions Manual Download Page 1

Page: 1 / 9

P O C K E T P O W E R 1 0 0 0 0

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

HALO POCKET POWER 10000

Thank you for choosing the HALO Pocket Power 10000!
Innovative and easy to use, the HALO Pocket Power
family provides a compact yet powerful charging
solution for your smartphone, tablet and other USB
devices. This portable charging solution fits easily into a
bag or pocket making it perfect anywhere you go!

Please read the operating instructions carefully before
using the product.

INCLUDED ITEMS

• HALO Pocket Power 10000
• USB Type C Cable
• Carrying Pouch

OPERATING INSTRUCTIONS

CHARGING YOUR HALO POCKET POWER 10000
IMPORTANT: Before using your HALO Pocket Power
10000 for the first time, fully charge it (so that pressing
the charge status button lights all four status LEDs).

To charge your HALO Pocket Power 10000, use the
supplied cable to connect the USB Type C Input Port to
a power source with a USB output, such as the wall
adapter included with your smartphone or other device.

Note: The white battery indicator will blink when
charging. It will stop blinking once the unit is fully
charged.

CHARGING YOUR ELECTRONIC DEVICES

Connect the cable that came with your device, or the
compatible cable that came with the HALO Pocket
Power 15000 to one of the USB Output Ports. Once your
HALO Pocket Power 10000 is connected, your electronic
device will begin charging.

SPECIFICATIONS

Model: HALO-PPE10000

Battery Capacity: 10000mAh

Micro Input: 5V/2A

Type-C Input: 5V/2.6A

Type-C Output: 5V/3A

USB Output 1: 5V/2.4A

USB Output 2: 5V/3A

Dimensions : 2.94 x 5.8 x 0.56 inches

Weight: 227 g

SAFETY PRECAUTIONS

• Read all instructions before using the product.
• Keep your power bank dry and away from moisture
and corrosive materials. The power bank should not be
used near water or wet areas such as bathtubs,

showers, bathrooms, sinks, swimming pools or
basements.
• Do not clean your power bank with harsh chemicals,
soaps or detergents. Just wipe the case with a soft
cloth.
• Keep your power bank away from heat sources,
including open flames, radiators, stoves, ovens, and
any other devices that product heat.
• Do not puncture, crush or subject to mechanical shock.
• Do not attempt to disassemble.
• Make sure the power bank’s charging ports do not
become contaminated with lint or other debris. Use a
canned-air type of product periodically to ensure that
the port openings are clear.
• Recharge your power bank once every three months
when not in use.

COMPLIANCE WITH FCC REGULATION

This device complies with part 15 of the FCC Rules and
RSS-Gen of IC Rules. Operation is subject to the
following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful

interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for
help.

CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certified peripherals and shielded
cables. All peripherals must be shielded and grounded.
Operation with non-certified peripherals or
non-shielded cables may result in interference to radio
or reception.

LIMITED WARRANTY

HALO2CLOUD LLC. (HALO) warrants its products to be
free from defects in material and workmanship under
normal use. Conditions are as follows:
• During the first 90 days from date of purchase, HALO
will repair or replace the defective product.
• HALO will, subject to inspection, repair the defective

product or replace it with a new or reconditioned unit.
The return must be accompanied by a Return
Merchandise Authorization (RMA) number to be
issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns
must be accompanied by a proof of purchase.
• The warranty does not extend to the electronic
equipment that is used, or incorporates with any of
our products and accessories. HALO shall not be held
responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental,
special, consequential or punitive damages arising out
of the use of HALO’s products.
For all questions or exchange requests, please call
888-907-6274, or email us at [email protected]
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product.
All implied warranties, including without limitation the
implied warranties of merchantability and fitness for a
particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for
any incidental, special, consequential or punitive
damages or any damages or losses of or to electronic
equipment or products that are used with any of HALO’s
products.