MAN1544-5
27
Any trigger zone may be allocated to any zone. However when a trigger zone has been allocated eg T1 to
zone 1 then only the remaining trigger zones T2, T3 or T4 are each available to be allocated one of the
remaining detector zones.
If multiple trigger zones are allocated e.g. T1 - Z1, T2
–
Z2, T3
–
Z3 then any one zone in alarm will operate
the first stage and any other zone in alarm will operate the second stage.
Setting up;
Determine the number of trigger zones (1 to 4) that will be required to activate the agent release. Relate
this requirement to the conditions outlined above
In the Zone Programming Menu select T1, 2, 3, or 4 and enter the zone numbers. Press
to update the
program.
Note:
Press Cancel to return to the Zones Menu and then
Move Right to access the Clock menu
.
5.3.2
Clock
To set the day and time press
and the day will be highlighted. Use the
Move Up or
Move Down keys to step through the days of the week, then the
Move Right key to access the hours
and minutes. To access each digit use the
Move Right and
Move Left keys and to increment each
digit use the
Move Up and
Move Down keys. Press
to set the time and then
Move Right To access the MCP Zone Menu.
CLOCK
FR 11 : 21
5.3.3
MCP Zone
Press
Enter
to assign the MCP to a Zone using the
Move Up and / or
Move Down keys to
select the Zone, ( 1- 8 ) that the MCP will be assigned to then
to update the Program.
MCP ZONE
2
PROGRAM
UPDATED
Press
to return to the MCP Zone menu and then
Move Right to access the Outputs Menu.
