MAN1544-5
23
5
Level 3 Access Programming
Level 3 is a technical level that allows a technician to;
SYSTEM
, Initialise the FACP so it is capable of recognising how the system is constructed; and
PROGRAM
program how it will present information as well as how it will react to a change of state of an
input and / or output
5.1
Password Entry
Returning to Faults in the Main Menu, Move Right for Password Entry to Level 3. OR if entering the
programming from the Default Screen press the
Move Left key to directly access from the ACF Reset
Menu.
Press
and a flashing cursor will appear below the word PASSWORD. By using the
Move up
and
Move down keys the number on the screen will be incremented accordingly. Once the first
password number has been set use the
Move right key to move to the next number to be set. This
operation has to be repeated four times as the PASSWORD is a four digit code. If a number is incorrect it
can be changed by using the
Move Left and
Right keys to position the cursor over the incorrect
number. Once the four numbers have been set pressing
initiates the verification of the PASSWORD
that has been entered. An incorrect PASSWORD will be displayed as REJECTED and return the operator to
the first menu of Level 1 access.
ENTER
PASSWORD
PASSWORD
0000
PASSWORD
ACCEPTED
Press
Enter
Password
Correct Password Entry
If the PASSWORD is accepted the screen will display ACF TRIP RESET. Use the
Right keys to move
through the menu to SYSTEM OR PROGRAM.
Note:
The operator has 10 seconds to complete Password entry. Failure to enter the Password in this
time results in the panel reverting to the default screen.
Note:
The System and Program Menus are not accessible if an Alarm condition exists even if the
correct Password is entered.
