5mm
45mm Diameter
55mm Diameter
5mm
Pencil
Corded Wood Pole
Fitting Instructions
Tools you will need...
fit your corded wood pole...
Step 1: Mark your Screw Positions
– these
vary by bracket type as follows:
Metal Brackets
Fit the brackets 5mm from each end of the
pole, this will be 25mm from the track (fig 1),
then screw the bracket button clockwise to
tighten (Fig 2).
With brackets attached, hold the pole to the
wall and, ensuring that the pole is level, mark
the screw positions (Fig.2).
Drill
Tape Measure
Spirit Level
Screwdriver
METAL BRACKETS
CORDED WOOD POLE APPROXIMATE WEIGHT LIMITS
5mm
5mm
25mm
Fig.1
Fig.2
WOOD CLASP BRACKETS
Fig.4
Fig.5
Fig.6
Fig.3
Wood Clasp Brackets
(poles up to 210cm only)
Slide the brackets on to the pole and put them
5mm from each end of the pole (Fig.3).
Screw into the hole on the clasp bracket to
secure to the pole (Fig.4).
With the brackets attached, hold the pole in
your required position, ensuring the pole is level
and then draw around each of the bracket
bases.
Using the allen key provided unscrew the
backplate from the bracket (Fig.5).
Position the back plate in the centre of the
drawn circle ensuring the hole on the stem of
the backplate is facing upwards and mark the
screw positions (Fig.6).
WOOD ARCHITRAVE BRACKETS
5mm
50mm
Fig.7
Fig.8
Fig.9
Wood Architrave Brackets
(poles up to 210cm only)
FIt the brackets 5mm from each end of the
pole and this will be 50mm from the track
(Fig.7).
Screw into the hole in the bracket cup to secure
to the pole (Fig.8).
With brackets attached, hold the pole to the
wall and, ensuring that the pole is level, mark
the screw positions (Fig.9).
Bracket Type
45mm Pole Diameter
55mm Pole Diameter
Clasp, Metal and Wood Architrave
Up to 2.7kg per metre
Up to 4kg per metre
Recess Bracket
Up to 3.5kg per metre
Up to 5kg per metre
Allen Key
