11
13. TROUBLESHOOTING
The Reflex 200 M4500000-3 Lifting Trolley has been designed and tested to achieve
optimal operational reliability and service life, under the proviso that routine maintenance is
carried out in accordance with the specified instructions. If problems should nevertheless
arise, you can find some instructions on what to do from the troubleshooting list below.
Remove the load from the load bed before any troubleshooting and repairs.
Inspections, service and repairs must be carried out by qualified personnel.
If problems persist after you have taken the measures specified in the list below, you
should contact an authorised repairman or your supplier.
Symptom
Procedure
Load bed does not move on
signal
A. Connect the battery charger to the lifting trolley and let it
charge for at least 8 hours.
B. If the load bed does not move after the procedure
specified in item A, contact an authorised repairman
and/or your supplier.
When repairs have been carried out to the lifting trolley, conduct a full performance
test with full load before using the trolley again.
14. INSTRUCTIONS FOR RE-USE
Do not throw the spent batteries in the waste, but dispose of them at an organised
collection point.
The machine is manufactured of recyclable material or of material that can be reused.
Specialist companies take care of the worn-out machines, dismantle them and utilise any
material that can be reused.
