Configuration
4
2.1.2
Changing settings
To modify network settings, use the supplied “ChipTool” software. The software can be installed by
running CHIPTOOL_INSTALL_V5.10.0.1.EXE.
After the software is installed, it can be started from the start menu entry “@ChipTool”. The
software immediately starts to scan the network for available BG02’s and shows each BG02 found in
a list (see the following screenshot):
Note that the serial number as well as the current network settings are shown. To change network
settings right click on the line where the BG02 is show and select IP configuration:
This will show the following dialog, where you can edit the network settings:
After everything is set up, press the “Config” button to transmit changed settings to the BG02.
