3
UH2X-P1
1.0 Introduction
The UH2X-P1 is an HDMI over single CAT5e/6 Transmitter and Receiver set. The
product can extend uncompressed audio/video along with IR, IP, RS232, USB, and
power using a single run of CAT5e/6 cable up to 100m long. The UH2X-P1 supports
4K (UHD) and 3D video. The extender boasts audio return extension. The
independent audio return source is user selectable. It can be either from the ARC pin
of the HDMI connector at the Receiver (ARC signal from the connected TV), or
from a separate SPDIF audio input connector provided on the Receiver.
The Receiver provides 2 USB 2.0 ports acting like a USB hub. The 48V PoH design
can power the Receiver (PD) from the Transmitter (PSE) eliminating the need for a
separate power supply for the Receiver.
2.0 Features
•
Fully compliant with HDBaseT 2.0 specifications
•
Supports Full HD (1080p/60), 3D and deep color to 100m
•
resolutions to 4Kx2K (UHD) up to 60m
•
Extends USB 2.0 and has integrated 2-port Hub in the Receiver
•
Perfect for KVM extension.
•
Extends Ethernet (100BaseT), bi-directional IR and RS232 control signals
•
Front panel LED indicators for status monitoring
•
Plug and play installation – takes minutes to setup
•
Supports pass through of HDMI embedded audio formats: LPCM 2/5.1/7.1
Channel, Dolby Digital 2~5.1 Channel, Dolby Digital Plus, Dolby TrueHD
and DTS-HD Master Audio
•
Supports HDMI ARC and external SPDIF digital audio return
•
Supports HDMI Locking Cable
•
USB ports can power devices such as audio extractors (Model HD-AUD)
2.1 Package Contents
Transmitter – UH2X-S-PSE
Receiver – UH2X-R-PD
Qty (1) UH2X-S-PSE
Qty (1) UH2X-R-PD
Qty (1) 48V DC Power Adapter
Qty (1) IR Remote Detector cable
Qty (1) IR Remote Emitter cable
Qty (1) User’s Manual
Qty (1) User’s Manual
*All packages are carefully inspected prior to shipment. However if you think that
you are missing an accessory, please contact Hall Research Support for further
assistance.
