12
Innovative Vehicle Solutions
2022
DIAG++
Operator‘s Guide
Starting DIAG++
Connect the USB dongle to the PC
Click on the DIAG++ short cut to start the programme.
If the security warning is displayed click on the run icon
to start DIAG++
The dongle is provided with a multi function LED to confirm correct function of the unit as follows:
Orange:
Indicates connection to USB port
Red:
Indicates connection to USB and EB+ 4.0 EBS
Green:
Indicates data is being transmitted
Power up the ECU. During the self check procedure the
system displays the following functions:
the trailer EBS warning light comes ‘on’ and stays ‘on’.
One audible cycle is produced by the EPRV’s
(EBS valves).
At the same time the LED on the USB dongle
will illuminate ‘red / green’ to show that it is
communicating with the ECU.
The EBS layout schematic should now be showing in
the browser window.
If no EBS layout is shown, click on the binoculars to
auto search for the correct PC connection port.
Red / green led
