41
6
Commissioning
6.1
Safety measures before commissioning
WARNING
Risk of injury due to lack of space!
A risk of injuries such as scratches, piercing or broken bones exists from
work equipment and/or components being arranged too closely together!
–
The set-up location of the lifting pins must be selected in such a way that
the room to manoeuvre necessary for personnel in the work area is not
restricted or impeded.
–
Only allow qualified personnel to carry out commissioning.
–
Cordon off the danger area.
–
Keep unauthorised persons away.
–
Designate a person to be in charge.
Make yourself sufficiently familiar with
–
the operating elements of the lifting pins,
–
the equipment of the lifting pins,
–
the way the lifting pins works,
–
the immediate vicinity of the lifting pins,
–
the measures for emergencies.
Perform the following activities before initial commissioning or recommissioning:
–
Check and make sure that all components are installed and working.
–
Check the lifting pins for visible damage; immediately rectify any defects found or
report them to the supervisory staff
– the lifting pin may only be operated in perfect
condition.
–
Check and make sure that only authorised persons are in the work area of the lifting
pins and that no other persons are endangered by use of the lifting pins.
–
Remove all objects and other materials from the place of use that are not required for
the operation of the lifting pins.
–
Keep a commissioning log.
