1 Introduction
1.2 Warranty and liability
10
Recycling
This symbol stands for the return of various materials into recycling.
CE marking
The CE marking on the product is the manufacturer's declaration that the
product satisfies the essential requirements of the relevant European health,
safety and environmental protection legislation.
1.2
Warranty and liability
The obligations agreed in the supply contract, the general terms and conditions as well as
the terms of delivery of the Positioning clamping pin and the legal regulations valid at the
time of the conclusion of the contract apply.
All information and notices in these Original operating instructions have been compiled
taking into account the applicable standards and regulations, the state of the art and our
many years of knowledge and experience.
These Original operating instructions are not intended to be, and should not be used as a
substitute means of determining the suitability or reliability of the Positioning clamping pin
for any particular user application. It is the duty of the manufacturer or distributor to carry
out an adequate and complete risk assessment, and evaluation and testing of the
Positioning clamping pin with regard to the respective specific application or use in
question.
Warranty and liability claims for personal injury and damage to property are excluded if
they are attributable to one or more of the following causes:
–
improper or inappropriate use of the Positioning clamping pin,
–
improper assembly, commissioning, operation, servicing and cleaning of the
Positioning clamping pin,
–
operation of the Positioning clamping pin with defective components or improperly
installed or non-functional components,
–
a failure to observe the Original operating instructions and the notices in the Original
operating instructions regarding assembly, commissioning, operation, servicing and
cleaning of the Positioning clamping pin,
–
use of unqualified or untrained personnel,
–
structural changes to the Positioning clamping pin (Conversions or other changes to
the Lifting accessory may not be made without the prior written consent of Erwin
Halder KG. In case of infringement, the Positioning clamping pin lose their EC
conformity),
–
improperly performed repairs,
–
use of non-approved spare parts or use of spare parts that do not meet the technically
specified requirements,
–
disasters, effects of foreign bodies, and force majeure.
