05-7182-01.fm
67
Maintenance and Servicing
5.1
Maintenance plan
Hako system maintenance customer:
Work to be performed by the customer by reference to the servicing and
maintenance instructions specified in the operating manual.
Daily
• Emptying the waste water tank
• Clean the waste water tank, drain hose, coarse dirt sieve and suction filter
• Check the cover seal of the waste water tank, clean if necessary
• Check the battery, charge if necessary
• Check the squeegee, clean if necessary
• Emptying the dirt hopper in the roller brush unit (optional)
• Check all brushes for foreign particles and clean if necessary
Pre-sweep suction unit (optional):
• Clean the cylindrical brush compartment
• Clean the plate filter using the shaking system
• Empty the dirt hopper
Weekly
• Clean the machine as required
• Clean the solution tank
• Check the sieve insert in the fresh water filter, clean or replace if necessary
• Check the scrubbing performance of the brushes/pads, clean if necessary
• Check the brushes and water retaining ring for proper fit and wear, replace
if necessary
• Check the suction performance of the squeegee, clean or replace the
sealing strips if necessary
• Check the fresh water supply to the brushes, clean if necessary
• Check the suction hose for tight fit and damage, clean if necessary
• Check the rubber of the lateral wiper, replace if necessary
• Batteries with Aquamatic system: Checking the acid level
• Pre-sweep suction unit (optional), check cylindrical brush, clean if
necessary
• On-board dosing system (optional):
Check section of hose in the dosing pump, replace if necessary
• Trial run and function test
