03-7182-01.fm
53
Operation
3.4.2
On-board dosing system (option)
The on-board dosing system is used for optimum dosing of the detergent.
I
Putting into service
The following points must be run through for putting into service and after
every canister change.
1. Release quick coupler
at canister lid by pulling the lower ring of
the coupling upwards. Unscrew lid from filled canister. Screw on lid with
integrated hose
and fit quick coupling with hose.
2. Turn the machine on with the key switch.
3. In the sub-menu
, select the
with the turn-push knob and confirm.
When the program is started, the detergent is conveyed to the brush unit by
means of the dosing pump. The program finishes automatically. The
on-board dosing system is ready for operation.
Attention
Only use detergents suitable for automatic machines (foam
retarded). We recommend use of our detergents and care agents
specifically developed for the machines. These products meet the
requirements of the German Detergent and Detergent Act (WRMG).
Fig. 20:
B
A
C
D
