50
03-7180-00.fm
Operation
3.4
Cleaning
Attention
• Before operating the machine, read and observe the safety
instructions in chapter 1.
• The machine can only be put into service when the driver is sitting
on the driver's seat.
• The travel drive can only be started if the accelerator pedal is not
being actuated when the machine is turned on.
No.
Description
1
Turn on the machine.
2
Activate the Fleet-Recorder (option)
3
Use the driving direction selection button to select the driving
direction
4
Select the cleaning programme
5
Actuate the accelerator pedal. The brush unit and the water
supply are switched on with the last selected setting.
6
If necessary, switch on the fresh water supply.
7
Set the fresh water quantity in the MFD using soft key
Fresh
water dosing
.
8
In the event of heavy soiling, increase the brush pressure
using soft key
Brush pressure
in the MFD or press the Boost
button for 1 minute.
Summary of Contents for Scrubmaster B175 R
Page 16: ...16 01 7180 00 fm Safety instructions H Fig 2 I G I H J G J A...
Page 100: ...100 06 7180 00 fm Attachments options...
Page 102: ......
