62
Maintenance and Service
5.7.1
Emptying the dirt hopper
Remove and empty the dirt hopper
(Fig. 26/5) daily or as necessary.
5.7.2
Disassembling the brushes
Check the brushes (Fig. 26/3) on the
cylindrical brush head (Fig. 26/1) week-
ly for signs of wear and change as nec-
essary.
1. Switch the vehicle off and remove
the key.
2. Pivot the deflector away, refer to
Section 5.8.
3. Unlock the brush holder (Fig. 26/5):
Press the locking lever (Fig. 26/2) to
position
A
and remove the brush
holder.
4. Pull out the brush (Fig. 26/3) and
check it.
5.7.3 Installing the brushes
1. Slide the brush in the cylindrical
brush head (toothing
X
must point
outwards) and allow to snap into
place on the oppositely facing catch-
es.
2. Press the locking lever (Fig. 26/2) to
position
A
and mount the brush hold-
er.
3. Locking the brush holder (Fig. 26/1):
Press the locking lever (Fig. 26/2) to
position
B
.
4. Pivot the deflector back, refer to Sec-
tion 5.8.
