Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
Attention! Read this manual before using Haklift wire rope hoist. The manual must always be available
to the user until the product is discarded.
1. Operating principle
The wire rope hoist works by pulling the lever back and forth when the wire runs through the wire rope hoist.
The wire rope hoist can be used for lifting, pulling and tightening.
The wire rope hoist has two jaws that open in turns so that the wire will always stay tight and will not be able
to loosen.
The safety pin on the wire rope hoist
’s winding lever breaks
at just above WLL of overload pressure.
2. Procedure before use
2.1 Wire rope hoists inspection before use
A competent person should check the wire rope hoist visually and its workability before first use. By testing the
wire rope hoist you make sure the wire rope hoist
hasn’t been damaged or broken during its transportation.
2.2 Inspection before lift/pull
Before every use the wire, anchor sling and other lifting tools conditions must be checked in case of any kind
of damage. In addition, the clamp
’
s function ability as well as the anchor
’
s durability is to be tested by
lifting/pulling the load for some distance and then releasing it.
2.3 Wire rope inspection
Check the wire rope for deformation, bending, twisting, cutting of lines, corrosion, overheating etc. before use.
2.4 Eye sling hook inspection
Check the hook for deformation, notches, wear and corrosion or in case of any damage.
2.5 Wire rope specification
It is allowed to use only this type of wire rope:
•
Steel core
•
Grade 1770 N/mm
2
•
Construction 6x19-IWRC
•
Dry
