Hakko Electronics Monitouch V Series, Reference Manual, Page: 63 / 746

Chapter 1 System Setting
1-26
Time Display Format
Valid when using the time display item.
SRAM/Clock Setting
Make the setting when using the SRAM or built-in clock.
Attribute Table
This setting may be required when using the CF card.
MR400 Format Table
This setting is required when connecting Sato’s barcode printer “MR400” to the
V series.
Temp. CTRL/PLC2Way Setting
Make the setting when using the temperature control network or PLC2Way
function.
Network Table Setting (Ethernet)
Valid when Mitsubishi Net10 or OMRON SYSMAC CS1 DNA is selected for the
PLC type for data read/write operation through Ethernet.
For more information, refer to “Chapter 11 Time Display/Calendar.”
For more information, refer to “Chapter 24 SRAM.”
For more information, refer to “Chapter 23 CF Card (V7 Only).”
For more information, refer to “Chapter 15 Print.”
For more information, refer to the V7 Hardware Specifications Manual.
For more information, refer to the V7 Hardware Specifications Manual.