Hakko Electronics Monitouch V Series, Reference Manual, Page: 58 / 746

Chapter 1 System Setting
1-21
1
Ini
tia
l S
e
tt
ing
Item
s
Modular Jack
Make the setting for modular jacks of the V series unit.
[Modular Jack 1]
•
[Editor Port]
This is the default setting. This is the port used for data transfer from the
personal computer. It can also be used for on-line editing and simulation.
When data transfer from a personal computer is started when the PLC and
the V6 are engaged in communications, the Main Menu screen is
automatically displayed on the V series. When an option other than [Editor
Port] is selected, it is necessary to select the Main Menu screen manually
([SYSTEM] + [F•1] switch) on the V series before transferring screen data.
•
[Memory Card]
Select this option when connecting to the card recorder (CREC).
•
[Barcode]
Select this option when connecting to the barcode reader.
•
[V-I/O]
Select this option when connecting to the serial extension I/O (V-I/O).
•
[Multi-Link]
Select this option when [Multi-Link2] is selected for [Connection] in the
[Comm. Parameter] dialog and “1” is set for [Own Stat. No.] for the V series.
When connecting the V series to the PLC with [Multi-Link2] selected for
[Connection], select [Multi-Link] for [Modular Jack 1] (or [Modular Jack 2]) for
the master station (Own Stat. No. 1) of the V series. Set either for [Modular
Jack 1] or [Modular Jack 2].
•
[Temp. CTRL/PLC2Way]
Select this option when using the temperature control network or PLC2Way
function. For more information, refer to the V7 Hardware Specifications
Manual.
•
[V-Link]
Select this option when using V-Link. For more information, refer to “Chapter
3 Serial Communications” in the V7 Hardware Specifications Manual.
•
[Touch Switch]
This option is valid for the V series compatible with analog RGB input.
•
[Ladder Tool]
This option is valid when [Mitsubishi: QnH (Q) series CPU] is selected for
[PLC Type]. It is possible to transfer ladder data using the screen data
transfer cable (V6-CP). For more information, refer to the V7 Hardware
Specifications Manual.
Screen data transfer can only be performed using this modular jack.