Hakko Electronics Monitouch V Series, Reference Manual, Page: 559 / 746

Chapter 23 CF Card (V7 Only)
23-14
Auto Uploading of Screen Data
By simply inserting a CF card into the V7 series, the screen data file in the CF
card is automatically written to the V7 series. You can exchange screen data
easily.
Writing from a PC to a CF Card
Follow the steps below.
1. Start the V-SFT editor.
2. Select [CF Card Manager] from the [File] menu. The dialog for specifying
the drive is displayed.
3. Specify the drive where the CF card is inserted and click [OK]. The CF Card
Manager will start.
4. Select [Write to CF Card] from the [File] menu. The [Write to CF Card] dialog
is displayed.
5. For [File to be Converted], click [Refer] and select the file (extension [*.V7])
to be uploaded automatically.
6. Be sure to check [ Use Default Loading].
7. When completing the setting, click [OK].
♦
Storage Target on a CF Card
The data for auto uploading on a CF card is stored, not in the user folder, but in
the [Dsp] folder in the [Dspdef] folder as follows:
Storage target: \Dspdef\Dsp
File name: Dspdef.bin (BIN file format)
What is the CF Card Manager?
The CF Card Manager is an application that allows you to write the data used in the V7
series to a CF card or to convert the data into each file format after importing the data
stored on a CF card. For more information, refer to page 23-48.