Hakko Electronics Monitouch V Series, Reference Manual, Page: 52 / 746

Chapter 1 System Setting
1-15
1
Ini
tia
l S
e
tt
ing
Item
s
Unit Setting
Make the setting for the V series unit. It is necessary to make the setting for the
functions you use. Be sure to check the setting before transferring a screen
data file. Clicking [Unit Setting] in the [System Setting] menu brings up the
following dialog.
♦
Memory Expansion
[Size]
•
V7 series: None/8M
•
V6 series: None/2M (Memory Extension 1)/4M (Memory Extension 1)
2M (Memory Extension 2)/4M (Memory Extension 2)
When the screen data file capacity exceeds the capacity of MONITOUCH,
use the add-on memory cassette (V7EM-F) or the expansion memory
(V6EM/4) optionally available. To know the memory capacity or free capacity
during screen editing, select [Tool]
→
[Memory Use].
♦
Backlight
[Action]
Select the operation of the backlight attached to the V series unit.
•
[ON]
Always turns backlight on.
•
[Auto 1]
Turns the backlight on when bit 11 (backlight) in [Read Area] “n + 1” (screen
status command) is set (1: ON). When bit 11 is reset (0: OFF), the backlight
is turned off after a lapse of the time specified by [Backlight OFF Time] (refer
to [Backlight OFF Time] below) if all the following conditions are raised.
Conditions:
- Bit 11 (backlight) of [Read Area] “n + 1” (screen status command) is reset
(OFF).
- Screen display stands still.
- All touch switches are turned off.
For more information on the screen data file capacity, refer to “Appendix 1 Fonts” in the
Reference Manual (Operation). For [Memory Extension 1] and [Memory Extension 2] for
the V6 series, refer to the V6EM/4 V6EM/4i (FPROM cassette) Instruction Manual
separately provided.