Hakko Electronics Monitouch V Series, Reference Manual

Page: 492 / 746

Chapter 18 Video Display (V7i Only)
18-17
18
Ma
cr
o
When specifying memory:
The contents of the setting are as follows:
Available devices
Video 2 MEMORY F0
F0 memory
About AUTO
When setting macro, you can set [AUTO] for the channel number (CH) and the
file number.
•
Channel number is set to [AUTO]:
[SNAP] [STROBE] [RESIZE] [ZOOM] [BRIGHT] [CONTRAST] [COLOR]
[VIDEO_INF] [PAUSE] [RESTART]
1. When the display is zoomed, the commands are performed for the
zoomed channel.
2. When the display priority is set, the commands are performed for the
prioritized channel.
3. When either 1 or 2 is not applied, the operation depends on the number
of displayed channels: if only one channel is displayed, the commands
are performed for the displayed channel; if multiple channels are
displayed, the commands are not performed.
•
File number is set to [AUTO]:
[SNAP] [STROBE]
The commands are incremented starting from [0] when no file exists, or
starting from the maximum number when some files exist. When reaching
the number of limitation, the commands are not performed anymore if you
set [Stop] for [When Exceeding the Limitation of Snap File]. If you set this to
[Auto], the commands are performed starting back to [0].
Internal
memory
PLC memory Constant Memory Card Indirect
F0
n Command No.
n + 1 CH No./File No.
n + 2 Setting Value
Command
name
Command
No.
CH No./File No. Setting Value
SNAP 0 1 to 4 (CH)
−
1 (AUTO) 0 to 32767 (File No.)/
−
1 (AUTO)
STROBE 1 1 to 4 (CH)
−
1 (AUTO) 0 to 32767 (File No.)/
−
1 (AUTO)
RE_SIZE 2
ZOOM 3 1 to 4 (CH)
−
1 (AUTO) 0 to 2 (Centering/Top Right/ Bottom
Left: at SVGA only)
BRIGHT 4 1 to 4 (CH)
−
1 (AUTO) 0 to 31
CONTRAST 5 1 to 4 (CH)
−
1 (AUTO) 0 to 31
COLOR 6 1 to 4 (CH)
−
1 (AUTO) 0 to 31
VIDEO_INF 7 1 to 4 (CH)
−
1 (AUTO) 0: SAVE, 1: DEFAULT
PAUSE 8 1 to 4 (CH)
−
1 (AUTO)
RESTART 9 1 to 4 (CH)
−
1 (AUTO)
DELETE 10 0 to 32767 (File No.)
For more information on [Limitation of Snap Files at AUTO] and [When Exceeding the
Limitation of Snap File], refer to page 18-5.