Hakko Electronics Monitouch V Series, Reference Manual, Page: 489 / 746

Chapter 18 Video Display (V7i Only)
18-14
Macro
By using macro, you can set up the movement of the video screen and color
adjustment. When not setting macro, the video screen is displayed with default
values.
Contents of the Default for the Video Screen
The status of video display is output in the system memory ($s) of the internal
memory. The contents of output are as follows:
•
$s930 (Video status)
*Bit 0 (Snapping)
When saving to a CF card, VGA (640
×
480 dots) size takes about 4 to 5 seconds.
Items Types Default value
Brightness 0 (Dark) to 31 (Bright) 16
Contrast 0 (Weak) to 31 (Strong) 16
Color strength 0 (Light) to 31 (Deep) 16
Address Contents
$s910 Video CH1 Brightness
$s911 Video CH1 Contrast
$s912 Video CH1 Color strength
$s913, 914 (System reserved)
$s915 Video CH2 Brightness
$s916 Video CH2 Contrast
$s917 Video CH2 Color strength
$s918, 919 (System reserved)
$s920 Video CH3 Brightness
$s921 Video CH3 Contrast
$s922 Video CH3 Color strength
$s923, 924 (System reserved)
$s925 Video CH4 Brightness
$s926 Video CH4 Contrast
$s927 Video CH4 Color strength
$s928, 929 (System reserved)
$s930 (Video status) Video status
$s931 (System reserved)
$s932 AUTO file number
$s933 Focus CH number (Display Priority)
$s934 CH number of the display area touched
1: Snapping
1: Video board error occurred
1: Snap file are full
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0
System reserved (Set [0])