Hakko Electronics Monitouch V Series, Reference Manual, Page: 484 / 746

Chapter 18 Video Display (V7i Only)
18-9
18
[V
id
eo]
Dia
log
•
[Single Snap]
Execute “snap” by double-clicking. When an image is being imported, the
video is displayed as a still image. It is released when the import is
completed.
•
[Strobe Snap]
Execute “strobe snap” by double-clicking. (The strobe images are displayed
and remained as still images.) By double-clicking again, it is restored to its
former size.
[Enlarged Display Position] ([Centering] [Top Right] [Bottom Left])
This option becomes active when you use SVGA models (V712iS, V710iS,
V708iS) for video display. If you perform enlarged display (by
double-clicking or using macro [ZOOM]), a part of the base screen is shown
because the video display size will be 640
×
480 dots on the SVGA models.
In this case, specify the display position.
Strobe Snap
Import the target video by copying a number of frames similar to strobe photography.
The image of the copied frames is displayed on the full screen of the MONITOUCH.
The image contains 16 strobe snap shots (160
×
120 dot size each). 16 shots are
processed as one image (640
×
480 dots).
When executing a “strobe snap,” other operations or macros are not available.
Wait until the strobe snap has completed.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
Strobe snap order
[Centering]
Video enlarged display
[Top Right]
Video enlarged display
[Bottom Left]
Video enlarged display