Hakko Electronics Monitouch V Series, Reference Manual, Page: 434 / 746

Chapter 15 Print
15-3
15
P
rinte
r Se
ttin
g
[Port]
Select the port where the printer cable is connected.
•
Parallel Port (Printer Port)
Select this option when connecting the printer using parallel interface.
The printer port of the V series is used.
•
Serial Port (MJ Port)
Select this option when connecting the printer using serial interface.
[Refer to Modular]
Choose MJ1 or MJ2 provided on the backside of the V series.
[Print Direction]
Choose the paper direction to print the screen.
Wide/ Tall
When [Tall] is selected, the screen is printed
with 90
°
rotated.
[Reversed Image]
Rev.: White and black are reversed.
Norm.: Printed as shown on MONITOUCH
[MR400 I/F Memory]
This option becomes active when the barcode printer MR-400 is selected.
Set this memory address when using an external command for printing. The
allocation of memory is shown below.
•
Control Memory (n)
•
Format table number specification memory (n + 1)
Set the number of the format table (call) to be printed.
MR400 I/F Memory Contents
n Control memory
n + 1 Format table number specification memory
(Call setting: 1 to 256)
A
A
Wide Tall
Print command
0: Standby
1: Printing
* This is automatically reset when
printing has been completed.
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MSB LSB
It is possible to specify the format call number using the MR_OUT macro command and
print the table. (
Refer to page 15-15.)