Hakko Electronics Monitouch V Series, Reference Manual, Page: 407 / 746

Chapter 13 Macro
13-24
•
SET_BUFNO
Average, maximum, minimum, and total of sampling buffers are stored in
system memory addresses $s180 to 434. (
For information on the
system memory, refer to “Appendix 1 Internal Memory.”) Set the buffer
number at system memory address $s177 before executing the command.
Available Devices
(SET_BUFNo)F1 Buffer number setting
•
GET_SMPL
This command stores 1 sampling data in the user memory.
Available Devices
(GET_SMPL)F1 Get sampling data
* Top memory number “n” of storage target
The format of the stored data varies depending on the sampling method.
- [Bit Synchronize] [Constant Sample] [Temp. CTRL/PLC2Way]
- [Bit Sample]
- [Relay Sample] (possible to set the ON information only)
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Buffer No. 0 to 11
Internal
Memory
PLC
Memory
Constant
Memory
Card
Indirect W Word
F0 Command
name
F1
F1 + 0 Sample buffer number
F1 + 1 Sampling number
F1 + 2 Top memory number “n” of storage target
*
n + 0 Time data 0
n + 1 Time data 1
n + 2
n + m
Sampling data
Sampling data
Buffer data of the
specified sampling
number
Time data
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Time data 0
Day: 1 to 31 Month: 1 to 12 Hour: 0 to 23
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Time data 1
Minute & second (unit: seconds)
[Time data 1]
÷
[60] = [A] Remainder [B]
[A]: Minute
[B]: Second
n + 0 Time data 0
n + 1 Time data 1
n + 2 Sample bit number
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0: OFF
1: ON
Sample bit number
Same as those of [Bit Synchronize]
n + 0 Time data 0
n + 1 Time data 1
n + 2 Sample relay number
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Fixed to “0”
Sample relay number
Same as those of [Bit Synchronize]