Hakko Electronics Monitouch V Series, Reference Manual, Page: 40 / 746

Chapter 1 System Setting
1-3
1
Ini
tia
l S
e
tt
ing
Item
s
PLC Type
Depending on the MONITOUCH model, the compatible PLC models vary.
For compatible PLC models, refer to the Hardware Specifications Manual or
“Chapter 5 Transfer” in the Reference Manual (Operation).
The explanation in this chapter is given for the case where a PLC model other
than [Universal Serial] and network-compatible models is selected.
Communication Parameter
Communication parameters must be set for communications between
MONITOUCH and the connecting apparatus. If communication parameters are
not set correctly, MONITOUCH may not establish communications with the
connecting apparatus. Be sure to check the communication parameter settings
before establishing communications.
In this chapter, the following important items are described.
•
[Read Area] (Refer to page 1-4.)
•
[Write Area] (Refer to page 1-10.)
•
[Calendar] (Refer to page 1-13.)
For information on other setting items, refer to “Chapter 3 Serial
Communications” in the V7 Hardware Specifications Manual.
When [Universal Serial] or a network-compatible model (JPCN-1, T-Link,
CC-Link, Ethernet, PROFIBUS-DP or NET/10) is selected for [PLC Type],
there are separate communication unit manuals that you should read. Be sure
to refer to the relevant manual.