Hakko Electronics Monitouch V Series, Reference Manual, Page: 340 / 746

Chapter 10 Sampling
10-45
10
Bi
t Sa
mp
lin
g
[Refer to Buffer Use]
The setting for [Buffer No.] in the [Buffering Area Setting] dialog can be
rechecked or modified. Click this button. The [Buffering Area Setting] dialog
where the buffer number is specified is displayed.
* For bit sampling, check that [Bit Sample] is chosen for [Sampling Method].
[Start Message GNo. and No]
Register messages connected to bits in the specified buffer on the message
edit window. Specify the group and line numbers of the top message.
(
For information on message editing, refer to Chapter 4 in the
Reference Manual (Operation).)
[Display in Area]
When bringing up the contents of bit sampling, bit activations (ON/OFF) can
be indicated at the extreme left. Choose from [No], [TYPE0] or [TYPE1].
•
No
The status is not displayed.
•
TYPE0
ON and OFF are indicated in one-byte characters.
•
TYPE1
- Two different messages for bit ON (“ON” for [TYPE0]) and OFF
(“OFF” for [TYPE0]) can be set as desired. Register the text on
message edit window, and display the text corresponding to the
ON/OFF status of the bit.
- When [TYPE1] is chosen, the [Start Message GNo. & No.] option
becomes active. Specify the group and line numbers of the start
message. The start message number is used for bit ON, and the
following message is used for bit OFF.
Example: [Start Message GNo. and No.: 1 & 0]
06-04 11 : 32 : 10 A Tank Temperature Up
06-04 11 : 33 : 15 A Tank Temperature Up
06-04 11 : 40 : 25 C Tank Temperature Down
06-04 11 : 50 : 13 C Tank Temperature Down
<ON> 06-04 11 : 32 : 10 A Tank Temperature Up
<OFF> 06-04 11 : 33 : 15 A Tank Temperature Up
<ON> 06-04 11 : 40 : 25 C Tank Temperature Down
<OFF> 06-04 11 : 50 : 13 C Tank Temperature Down
Display in Area [TYPE0]
Occur 06-04 11 : 32 : 10 A Tank Temperature Up
Reset 06-04 11 : 33 : 15 A Tank Temperature Up
Occur 06-04 11 : 40 : 25 C Tank Temperature Down
Reset 06-04 11 : 50 : 13 C Tank Temperature Down
Message GNo. 1 edit
No. 0
No. 1 Occur
Reset
Display in Area (TYPE1)