Hakko Electronics Monitouch V Series, Reference Manual

Page: 324 / 746

Chapter 10 Sampling
10-29
10
T
rend
Sa
mpl
in
g
Switches for Trend Sampling
When displaying sampled data, scrolling, resetting, etc. can be performed by
setting a switch.
♦
Notes on Setting
[Division No.]
Specify the division number. Specify the same division number as the trend
sampling part. (
For information on the division number, refer to
Chapter 2 in the Reference Manual (Operation).)
[Function]
Set the switch function. The following switch functions are available with
trend sampling.
Function Contents
Roll Up Scrolls by one data element toward the most recent entry. If all data
cannot be held in the graph, one data element at a time scrolls into
view.
Roll Down Scrolls by one data element toward the oldest entry. If all data cannot
be held in the graph, one data element at a time scrolls into view.
Plus Block Scrolls by one page toward the most recent entry.
Minus Block Scrolls by one page toward the oldest entry.
Graph Return Returns to the most recent graph display when it is pressed while
flashing. Flashing is canceled as well as the selection.
Reset When the switch is pressed once, it is turned on. Pressing it again
within 2 seconds clears the buffering area. Sampling restarts
immediately after clearing. If not pressed again within 2 seconds, the
switch is turned off, and resetting is nullified.