Hakko Electronics Monitouch V Series, Reference Manual, Page: 318 / 746

Chapter 10 Sampling
10-23
10
T
rend
Sa
mpl
in
g
♦
[0] to [15] Tab Window
These tab windows include options for setting up drawing properties and
maximum/minimum values for each trend line.
[ Trend Display]
When this box is checked, the options for drawing properties become active.
These options are described as follows:
[Line Color]
Choose the color of the trend line.
[Line Type & Point]
Choose either a solid line or a dotted line. Choose from 6 options for the line
type and 6 options for dots.
[Data Length]
Choose either [1-Word] or [2-Word] for data length of the trend data memory.
[Graph Max. Value] [Graph Min. Value]
Specify the maximum and minimum values for sampling data.
* Do not specify the same value for both [Graph Max. Value] and [Graph Min.
Value]. Doing so will result in an error.
* When specifying [Graph Max. Value]/[Graph Min. Value] as memory (except
[Constant]), the graph max./min. values is reflected at the same time when the
graph is displayed or the macro command [TREND_REFRESH] is executed.
( For information on TREND_REFRESH, refer to “Chapter 13 Macro.”)