Hakko Electronics Monitouch V Series, Reference Manual, Page: 306 / 746

Chapter 10 Sampling
10-11
10
B
u
ffer
ing A
rea
♦
[0] to [11] Tab Window
[ Use Sample Buffer]
When the [Use Sample Buffer] option is checked, the following options
become active.
When the buffer is not used, uncheck the option.
The active options are explained below.
[ Memory Designation]
•
Unchecked:
Sampling memory addresses are allocated consecutively from the read
area.
•
Checked:
The memory address for sampling data can be specified.
•
When [Memory Designation] is unchecked ( ):
Sampling memory addresses are allocated following the sampling control
memory (read area “n + 3” and later).
•
When [Memory Designation] is checked ( ):
The memory address for sampling data can be specified.
When this option is checked, a read from the PLC occurs more frequently than when it is
not checked, and the processing speed may be slowed down. To increase the
processing speed, uncheck this option.
n: Read area
Buffer No. 0 - 3 Buffer No. 4 - 7 Buffer No. 8 - 11
n n n
n + 1 Read area n + 1 Read area n + 1 Read area
n + 2 n + 2 n + 2
n + 3 Sample control n + 3 Sample control n + 3 Sample control
n + 4 n + 4 n + 4
n + 5 n + 5 n + 5
n + 6 n + 6 n + 6
n + 7 Sampling data n + 7 Sampling data n + 7 Sampling data
n + 8 n + 8 n + 8
n: Read area
Buffer No. 0 - 3 Buffer No. 4 - 7 Buffer No. 8 - 11
n n n
n + 1 Read area n + 1 Read area n + 1 Read area
n + 2 n + 2 n + 2
n + 3 Sample control n + 3
Sample control
n + 3
n + 4 n + 4 Sample control
n + 5
Desired
address
Desired
address
Desired
address
Sampling data Sampling data Sampling data