Hakko Electronics Monitouch V Series, Reference Manual, Page: 250 / 746

Chapter 8 Graph Display
8-15
8
Pi
e Gr
ap
h
[Color]
When the [ Mark Display] box is checked, this option becomes active.
Choose the desired color for the mark.
[ Separate Display]
The bar is shown in separate colors: [Lower Color], [Range Color], and
[Upper Color] specified in [Alarm Color] tab window when this option is
checked (
). ( Refer to examples on page 8-10.)
[Process Cycle]
Select the desired process cycle. ( Refer to “Appendix 2 Process
Cycle.”)
♦
[Alarm Color] Tab Window
[Upper Color]
Color to be used when the current value exceeds the upper limit (refer to
examples on page 8-10.)
[Lower Color]
Color to be used when the current value falls short of the lower limit (refer to
examples on page 8-10.)
[Range Color]
Color to be used between the upper and lower limits (refer to examples on
page 8-10.)
For each option, choose the desired colors for [Foreground] and [Background].
The [Background] option becomes active when any tile pattern other than
pattern 0 (extreme left) is chosen for [Tile].